Custom ID Card Holders At New Zealand's Lowest Prices!

This ID Card Holder NZ range from Dynamic Gift holds 32 products: clear PVC pouches, rigid shells, waterproof pouches and a biodegradable vegan leather holder. Sixteen PVC sizes are listed in stock, priced per piece and sold straight from the page. Artwork design is free, and every quote arrives in New Zealand dollars.

How to Choose the Right ID Card Holder

Start with the card size

Measure the card first, because every holder is cut to a card size. Business, credit and ID cards at 88mm x 54mm fit the rigid holders named here. Bigger event passes go into the in stock PVC pouches, which run from 60mm x 90mm up to the In Stock Portrait 125mm x 170mm PVC Card Holder.

Booklets and thicker cards need 1mm to 2mm of extra room each side.

Soft PVC or a rigid shell

Soft PVC pouches are the everyday pick for visitor passes and conference badges. A lanyard card holder also needs strong loops, so these carry reinforced loops for lanyard fitment.

Rigid holders protect a card that gets swiped all day. The portrait Slide Mech Rigid Card Holder has a polished front and frosted reverse, and the Landscape Edged Rigid ID Holder hangs landscape in clear only.

Colour, clips and companions

Most of the range is clear, but Rainbow PVC Card Holders add colour in 90mm x 60mm, 100mm x 80mm, 100mm x 100mm, A6 and A7 sizing.

Some staff never wear a strap. A Clamp-it Aligator Style ID Clip loops through the holder and clamps to a pocket or belt loop, which suits hospital and secure site teams. Cards scanned all day suit retractable badge reels, and printed cards and passes cover the card itself.

Which ID Card Holders Cover Most Briefs?

In Stock Portrait 60mm x 90mm PVC Card Holder

This is the everyday visitor pass pouch, listed in stock at NZ$0.85 with an add to cart button. It is clear PVC with triple heat sealed edges and reinforced loops built for lanyard fitment. Pouches usually stay clear so the ID shows through, but a logo or block colour fill can be printed.

Bespoke sizes are offered, and a Rush Service flag sits on the In Stock Portrait 60mm x 90mm PVC Card Holder page.

Open Slide Rigid ID Holder

Rigid shells suit cards that get swiped at every door. This one is cut for 88mm x 54mm business and credit card sizes, and it hangs portrait or landscape. Colours run Black, Blue, Red and White.

Its page recommends twin Lan01 or Lan04 fittings, or a single Lan02 croc clip, and shows a Rush Service flag. Full details sit on the Open Slide Rigid ID Holder page.

Closed Landscape ID Holder

Closed holders keep the card fully enclosed, unlike the open face styles beside them. This one hangs landscape, fits 88mm x 54mm business and credit card sizes, and comes in a clear frosted finish only.

Its page recommends a Lan02 crocodile fitting, with Lan01 and Lan04 usable too, and the product title reads in stock now. A Rush Service flag sits alongside on the Closed Landscape ID Holder page.

Waterproof Badge & ID Holders

Outdoor crews and festival staff work in the rain, so the pouch has to keep water out. These badge holders are described as waterproof and super durable, made to your card size rather than a stock size.

Small electronic devices fit inside too, according to the page. Screen printing is available, and most material colours are offered, so ask for sizing on the Waterproof Badge & ID Holders page.

Biodegradable Pass/Card Holder

Sustainability briefs are covered too. It is made from biodegradable soft touch colour change vegan leather, holds up to four cards, and measures 9.9cm x 7.2cm. Its page states it biodegrades by at least 90% in 180 days in compostable conditions.

Decoration runs to embossing, foiling and screen printing, with colours in Brown, Grey, Black, Blue and Green. Travel cards and staff passes both fit the Biodegradable Pass/Card Holder.

ID Holder NZ Range at a Glance

Facts below come from each product's page.

Branding, Fittings and Turnaround

When a logo matters, PVC pouches take a printed logo or block colour fill. Waterproof pouches take screen printing, and the biodegradable holder takes embossing, foiling or screen printing.

Rigid pages name Lan01, Lan02 and Lan04 fittings. Most orders pair a holder with an ID lanyard, and the wider Lanyards & ID Accessories range covers the straps.

Artwork is handled in house at no cost. Send a sketch, design files or a description, and the design team returns a virtual mock-up, then production ready artwork for approval.

In stock PVC sizes are bought straight from the page, while made to order holders are quoted against your date. Every product page opened here shows a Rush Service flag, and the rush collection lists what can leave quickest.

Why Order From Dynamic Gift

Bring a cheaper New Zealand quote for the same stocked holder, all costs to your door included, and we will beat it.

In-house designers place your logo on the holder for free, and you approve a virtual mock-up first.

Samples are free on most products, and Super Rush is offered where a date will not move. We are New Zealand owned and operated, and our team sits at 22 McColl Street, Newmarket, Auckland, on 0800 177 666.

Need numbers for an order? Ask for a free quote from any page in the ID card holders range, or talk to our team about card size and quantity.