Stubby Holders

Dynamic Gift supplies custom stubby holders across New Zealand, from a brewery launch to a rugby club fundraiser. This Stubby Holders range currently lists 17 products, spanning 3mm neoprene sleeves and vacuum insulated stainless steel coolers. Artwork design is free, and every quote comes back in New Zealand dollars.

Which Stubby Holder Suits Your Drink and Your Crowd?

Start with the can or bottle your crowd will be holding. Slim 250ml cans call for a narrow sleeve such as the Bergen Slim Can Cooler. Long-neck bottles and 375ml cans suit the Kovina Stainless Steel Stubby Holder.

Next, decide how long the drink has to stay cold. Neoprene keeps hands dry and takes a full colour print, which makes it the usual pick for giveaways. Double wall stainless steel holds the chill for longer and makes a better client gift or prize.

Personalised stubby holders for a wedding, a 21st or a fishing trip are quoted the same way as a corporate run. Beyond this page, the wider Drinkware range holds more than 600 products across 13 subcategories. Reusable cups and tumblers cover the morning coffee run, and branded drink bottles cover the gym bag.

Two more neoprene styles are worth a look before you settle. A Reversible Stubby Cooler prints on both faces, so one sleeve carries two designs. Shaped like a sports top, the Jersey Can Cooler is a natural fit for a club sponsorship or a supporters' giveaway.

Five Stubby Holders From the Range, Up Close

Each detail below was read from that product's own page, so it matches what the factory makes.

Bergen Slim Can Cooler

Slim cans have taken over the chiller, and this sleeve is cut for them. It fits most 250ml cans and is made from 3mm neoprene with smart matching stitching. Laid flat it measures 88mm wide, 137mm high and 5mm thick.

Its listed print area is 60mm x 80mm, sized for a logo rather than a full wrap. Units arrive flat-packed, ready for a goodie bag or a bar giveaway, as the Bergen Slim Can Cooler page shows.

Bathans Stubby Holder

This is the classic shape most people picture when they hear the words stubby holder. It is made from 3mm neoprene, sized to fit most standard cans and bottles, and measures 108mm high by 70mm wide. Your logo goes on by sublimation print, and the page lists a variety of colours to match a brand palette.

Units are packaged loosely for handing out at the gate, and the listed lead time is 20 working days. Colour options sit on the Bathans Stubby Holder page.

Neoprene Stubby Holder

This is the thicker sleeve for hands that hold a cold drink all afternoon. It uses 4mm neoprene, fits most stubby bottles and cans, and measures 70mm across by 108mm high. It keeps condensation off your hand as well as warmth off the drink.

Its sublimation print area is 209mm x 108mm, so a pattern or a sponsor list fits alongside a logo. Specs are listed on the Neoprene Stubby Holder page.

Brewski Pro Vacuum Stubby Cooler

Client gifts and prizes need something that outlasts the weekend. This cooler is 300ml double wall vacuum insulated stainless steel with a powder coat finish and a screw-on top. It fits most standard cans and bottles, and a bottle opener is built in.

At 80.5mm across and 132.5mm high, it ships in a gift box measuring 140mm x 85mm x 86mm. A range of colours is listed on the Brewski Pro Vacuum Stubby Cooler page.

Kovina Stainless Steel Stubby Holder

Long-neck bottles need a taller holder, and this one is built for them. It is double wall vacuum insulated stainless steel, sized for standard long-neck beer bottles and 375ml cans. A screw-on rubber gasket grips the bottle or can, so it stays put on a boat deck or a ute tray.

Engraving finishes in a silver colour, and print is offered in multiple colours. Full specs sit on the Kovina Stainless Steel Stubby Holder page.

Stubby Holders NZ: The Five Compared

Every cell comes from the product's live page. No price or minimum is shown, because each stubby holder job is quoted on its own.

Printed Stubby Holders: Branding Methods and Lead Times

Neoprene takes sublimation print, which is how the Bathans, Neoprene and Reversible styles carry full colour artwork. Stainless steel is branded differently: the Kovina engraves to a silver finish and also takes print in multiple colours. Across the range, the category page also names full colour transfer and screen printing as options.

Vector files in Ai, EPS or PDF format give the fastest proof, because they sit straight on the product template. A PNG, JPG or PSD works too, and an in-house designer rebuilds it as vector at no charge. Nothing goes to production until you have approved a virtual mock-up.

Lead times are printed per product rather than across the range. The Bathans Stubby Holder page lists 20 working days, while the Jersey Can Cooler and Reversible Stubby Cooler list 25 working days. For a tighter date, check the Rush Products collection and ask the team what is achievable for a stubby holder run.

Why Order From Dynamic Gift

Branded stubby holders are a price-led buy, so the Price Beat Guarantee does real work here. Show a lower New Zealand quote for the same stocked item, with print and delivery to your door included, and Dynamic Gift beats it.

Design costs nothing at any quantity. Hand over a logo, a rough sketch or a written brief, and an in-house designer builds the virtual mock-up you approve before the run starts.

Free samples are offered on most products, so you can feel the neoprene before you commit. Dynamic Gift is New Zealand owned and operated from 22 McColl Street in Newmarket, Auckland, and the team picks up on 0800 177 666.

Ready to put your logo on a cold drink? Request a free quote from any product page in the Stubby Holders range, or contact Dynamic Gift with your quantity, artwork and event date.